Solar Sound & Light Siren STSG-22T

The solar powered sound and light alarm STSG-22T is an alarm signal device used in hazardous areas to send warning signals to people through sound and light. When an emergency situation such as an accident or fire occurs on site, the control signal sent by the alarm controller activates the alarm circuit and emits an audible and visual alarm signal to complete the alarm purpose.

Highlights

The lamp housing is made of stainless steel material, which has strong impact resistance.
180 ° clear and ultra bright LED alarm tube, equipped with a super strong buzzer, stable operation.
Long service life, low power consumption, not affected by side walls and water.

Product Details

ST SG-22T Solar Alarm Manual

Function and Features

Equipped with volume and type adjustment switches, with 7 sound options to choose from
Large solar panels have a large capacity and long working time.
Light controlled sensor, switch control.
The shell is made of aluminum alloy die-casting, which can effectively resist salt spray corrosion and has good waterproof, moisture-proof, and shockproof functions
Stainless steel mesh effectively protects warning lights and prevents collisions
Dual speaker alarm with wide transmission range.

Description:	Product Description
Product Name:	STSG-22T Solar Alarm
Working voltage:	DC12V/24V AC220V/380V
Output power:	6-25 W
Working frequency:	50Hz～60Hz
Decibel:	106~140
Working temperature:	-30℃～+70℃
Work environment:	10%～95%(no condensation)
Criminal methods:	sound and light
Sound frequency:	800Hz (D sound)
Tone:	Tone A, other tones can be customized
Color:	Red, Yellow, Blue, Green
Protective equipment:	IP56
Material lampshade:	magnesium alloy bulb: PC speaker: ABS
Application areas:	Safety signal devices for highways, port roads, underground tunnels, helicopters, etc.
Warning size:	325 (length) x 135 (width) x 280 (height) mm
Crown plate:	560 (length) x 350 (width) mm
Net weight:	3.5 kilograms

Installation and Instructions

Check if the power supply and rated voltage of the sound and light alarm are consistent.
The sound and light alarm is fixed on the installation surface with 4 M6 screws, and the installation surface should be flat and have sufficient mechanical strength.
Connect the power and control wires from the wiring point, and correctly connect the power and control wires according to the terminal definitions on the label.
Before removing the power supply, please check if the power cord and other control wires are connected correctly.
Rotate the volume adjuster to adjust the volume.

Attention: Please follow the instructions in the manual to install and use this product correctly.